Flue Draught Stabilisers

In almost all heating installations, the draught created in the chimney is greater than that required by the boiler. The draught can vary from 0 up to 100 Pa during the heating season. The variations depend on differences in temperature as well as wind conditions. The consequences of an unstable draught are lower efficiency, incomplete combustion and breakdowns. A stable draught is important irrespective of whether you use oil, gas or other solid fuels.

The draught stabiliser keeps the draught constant during the entire heating season and thereby secures an optimal combustion. The draught stabiliser is also very important in ventilating condensate in the chimney. When burning wood the draught stabiliser lowers the temperature in the chimney, minimising the risk of soot fire.

The height and area of the chimney, the output of the boiler and the type of fuel used will determine the size of the draught stabiliser.

The Tigex draught stabiliser, developed and patented by SPX Tigerholm, is manufactured in stainless steel and is the market’s only draught stabiliser with a fully balanced damper. In practical terms, this means it can be fitted in almost any position (angled, vertical or horizontal). Since its market introduction in Sweden in 1994, Tigex continues to be the first choice among the HVAC installers and boiler manufacturers of the private house segment.

We supply both the Tigex 25 and the Tigex 150 draught stabiliser unit and all the various adaptors for fitting to you specification of flue. Sizes ranges from 130mm to 180mm flues and for round flue pipes of for Insulated T shaped fittings.

Please see our draught stabilisers section here :- Draught Stabiliser’s